In order to ensure the normal and reliable operation of the oil-free silent air compressor and ensure the service life of the unit, it is necessary to formulate a detailed maintenance plan, perform fixed-person operations, regular maintenance, and regular inspection and maintenance to keep the oil-free silent air compressor clean and No oil, no dirt.
Refer to the table below for maintenance of main components:
Note: A. When repairing and replacing various components according to the above table, it must be confirmed that the pressure in the oil-free silent air compressor system has been released, it has been separated from other pressure sources, the switch on the main circuit has been disconnected, and it is not allowed to close. safety sign.
B. The replacement time of compressor cooling lubricating oil depends on the use environment, humidity, dust and whether there is acid and alkali gas in the air. The newly purchased oil-free silent air compressor must be replaced with new oil after 500 hours of operation for the first time, and then replaced every 4000 hours according to the normal oil change cycle, and the machine that runs less than 4000 hours per year should be replaced once a year.
C. The oil filter must be replaced after 300-500 hours of running for the first time, after 2000 hours of use for the second time, and every 2000 hours after that.
D. When repairing and replacing the air filter or intake valve, remember to prevent any sundries from falling into the main chamber of the compressor. When operating, close the entrance of the main engine. After the operation is completed, turn the main engine several times by hand in the direction of rotation to ensure that there is no obstacle before starting the machine.
E. The tightness of the belt must be checked every 2000 hours of machine operation. If the belt is loose, it must be adjusted until the belt is tensioned. In order to protect the belt, it is necessary to prevent the belt from being scrapped due to oil pollution during the whole process.
F. Every time the oil is changed, the oil filter must be replaced at the same time.
G. Replacement parts should use original company parts as much as possible, otherwise the supplier will not be responsible for matching problems.
