1. A wide and well-lit place should be selected to facilitate the space and lighting required for the operation, maintenance and repair of the screw air compressor.
2. The ground in the screw air compressor room must be flat and hard (generally a cement floor is sufficient). At the same time, attention should be paid to keep the ground clean and free of debris accumulation, especially inflammable and explosive materials, and should be equipped with fire extinguishers and other facilities to ensure The security of the machine room is guaranteed.
3. The placement of the screw air compressor should be careful not to stick to the wall, and a certain distance should be reserved to ensure a certain space for ventilation and maintenance, which is also conducive to the maintenance and maintenance of the air compressor.
4. A certain ambient temperature should be maintained in the screw air compressor room, which should not be higher than 35°C and should not be lower than 0°C. Note that the temperature of the air compressor room should be controlled as low as possible, and the screw air compressor will absorb air with a higher temperature and reduce the exhaust air volume.
5. The place where the air compressor room is located should be kept dry, with good ventilation, less dust and fresh air. Try to avoid dusty, oily and humid environments to reduce damage to the screw air compressor and prolong its service life. Furthermore, the screw air compressor should not be allowed to inhale corrosive gases, paint molecules, and gases containing explosive or chemically unstable or steam, so as not to endanger the air compressor users or cause rapid damage to the unit.
6. The operator should only operate and maintain the air compressor after reading the operation manual. When an accident occurs, the equipment after-sales service personnel must be notified immediately. At ordinary times, attention should be paid to regular maintenance and maintenance of the various parts of the air compressor, so that the machinery and equipment are in the best operating state.
7. It is strictly forbidden to bump the pressure pipes in the screw air compressor room, and it is strictly forbidden to disassemble and assemble under the condition of electrification and pressure.
8. Even in a reasonable use environment, the compressed air will still contain a large amount of water and trace oil, which will reduce the production efficiency and product quality of the factory. Food contact, so it is necessary to install corresponding compressed air purification equipment.
9. For maintenance and repair work, it is best to purchase products, compressor oil and other materials through the source air compressor manufacturer. As a relatively common equipment, screw air compressors also have many details in their maintenance. Proper maintenance can prolong the service life of the air compressor.
