The work requirements of the air compressor is very special, in order to improve production efficiency, the relevant provisions that the air compressor compressed air is dry and clean, but many people in the use of air compressors have a water compressor situation, what is the specific reason for this? The following together to listen to a small share it!
Reason 1: because there is always water in the air, the so-called humidity, after compression will become supersaturated state, the water in the air analysis out, become liquid. The moisture content in the compressed air is related to the humidity of the air, such as the environment in the machine room is too humid, it will make the water content in the air exceed the use standard.
Reason 2: The automatic drain of the air compressor itself is clogged or the automatic drain of the air storage tank is clogged.
Reason 3: No corresponding dryer is installed or does not work normally after installation (failure of drying equipment, which is not found and dealt with in time), and the compressed gas of the air compressor is not treated in time, resulting in the exclusion of a large amount of water still contained, which cannot meet the normal use requirements.
Reason 4: Inadequate post-compression measures. In production processes with strict requirements for compressor gas quality, there are usually facilities such as precision filters to perform a second action on the gas to further purify it until it meets the production requirements.
