With the development of the economy, the air compressor has become a necessity for the development of contemporary industry, and its application is becoming more and more extensive. The purchase cost of the entire air compressor is about 13%, the maintenance is about 10%, and the electricity cost is up to about 77%. The country is also paying more and more attention to energy conservation. emission reduction.
How can the screw air compressor save energy?
1. Only 10% of the electrical energy consumed by the air compressor is converted into compressed air, and the remaining 90% is converted into heat energy. It can be seen that compressed air is ten times more expensive than electricity, but we often ignore this point. In most factories, the sound of air leakage can be heard everywhere, but no one pays attention to it at all. If we solve the leakage problem, we will save a lot of energy. Therefore, when we hear the air leakage, we must take timely measures measures.
2. It can be connected with a waste heat recovery device to effectively use the heat generated during the operation of the unit to achieve energy saving and emission reduction.
3. The use of frequency conversion control technology can greatly reduce power consumption.
4. Set the air compressor on/off according to the actual air volume and pressure.
5. Check whether there is any air leakage in the air circuit of the equipment, and close the valve when the air is not in use to reduce waste.
6. When choosing, choose energy-saving products to see how much pressure can meet the normal production. For example, if the pressure is 0.3MPa, the production can be satisfied, but if you choose 0.7MPa, it will definitely be a waste. In addition, when choosing, pay attention to whether it is the second-level energy efficiency or the third-level energy efficiency!
