Unlike other home appliances, the air compression system needs to run 24 hours a day to ensure a good purification and filtration effect. Because it has been in operation for a long time, it absorbs a lot of dust particles in the air. In the case of a long-term return air, even if there is a filter screen, it will accumulate dust and dirt for a long time, which will affect the normal operation of the fresh air system. At the same time, it will also affect the effect of heat exchange, which will seriously reduce the service life of the new fan. It is necessary to regularly clean and maintain the air compressor system.
Cleaning of filters and other parts
The filter screen of the air compressor system needs to be cleaned or replaced regularly to avoid secondary pollution caused by accumulated dust. When cleaning the primary filter, pull it out of the case. The removed primary filter can be flicked with your hands, or the dirt and dust can be sucked up with a vacuum cleaner. When cleaning the total heat exchanger of the air compression system, take out the total heat exchanger from the chassis and clean it with a vacuum cleaner or rinse it with tap water (air to dry after rinsing).
The HEPA high-efficiency filter cannot be washed with water, but can only be replaced. Remove the original HEPA filter from the chassis and install the new filter according to the original method. The HEPA high-efficiency filter is a consumable material and cannot be recycled. After making sure that the cleaned and replaced parts are dry enough, restore them according to the steps of disassembly and double check to make sure they are in place.
Cleaning of pipes
This step can be ignored in the ductless air compression system. During the use of the ducted fresh air, if the ducted fresh air is always kept in a ventilated state, dust will rarely gather in the duct. However, if the fresh air system has been emitting oil fume, you should also pay attention to the cleaning of the pipes. You can find professional cleaning personnel to clean the oil fume in the pipes. In addition, it is also necessary to regularly check whether the pipes are loose, leaking and cracked, especially the return air exhaust pipes. If the air leaks, it will cause incomplete exhaust and poor purification effect.
Cleaning of air intake and exhaust
The exhaust port is the channel for the indoor dirty air to be discharged. After the air compressor is turned on for a long time, the exhaust port is easy to absorb a large amount of dust. Once the indoor air is blocked and the indoor air is not discharged smoothly, part of the dirty air will remain in the room, which will affect the health of indoor people. healthy. At this time, we need to use a professional cleaner to clean the tuyere.
Control panel and piping air tightness
The control panel of the air compressor system is a relatively sophisticated electrical component. Long-term use will absorb dust and accumulate moisture, which may easily lead to failure of the control panel or damage to components. However, due to the vibration of the new fan, the pipes of the air compressor system are prone to cracking and air leakage after a long time of use. In this case, it is also necessary to be inspected by professionals and repaired in time to improve the operation effect of the fresh air.
Regular maintenance of the air compressor system can not only ensure the use effect of the air compressor system, but also prolong the service life of the air compressor system to a certain extent. Therefore, the cleaning of the air compressor system filter cannot be ignored.
